Ammo Can Locking Hardware Box Case Can (3rd Gen) fits 50 Cal 30 Cal 20 mm 40 mm

Description

Dear Customer,  I am proud of our Country, proud of our Second Amendment rights,  and proud of the fact that I still have my lockers
made here in the USA.
... Take care and be safe , And here is to a great 2021.  Jon
**
BE ADVISED!!
There are some unethical folks selling what "looks" like my locker. These are clones of my design. AND they have even stolen my pictures and are using them in their ad. Captain Jon's lockers are good quality, machined SS, made here in the USA and will be labeled "
Captain Jon's Green Can Lockers".
Please don't accept any imitations.
Captain Jon's are the original and made with pride here in the US.
And I am not afraid to put that in writing.
I worked my butt off to invent and perfect these. It is a shame others feel the need to help themselves to my hard work.
Please buy only Captain Jon's Green Can Lockers
( also branded
Ammo Can Man
)
.
You take your chances buying from anyone else. Jon
Don't be fooled by copy cats, If it's not "Captain Jon's", its not a original
.
The "ORIGINAL"  Captain Jon's Green Can Ammo Locking Hardware
.
Now the
Third
Generation
( Patented)
Now 30% less protrusion into the can.
STILL
MADE IN THE
USA
AND
DAMN PROUD OF IT
...............Accept No Substitutes
Still the Real Deal.  Still  High Quality Stainless Steel and still the Best and Easiest way out there to
"Make your ammo can
-
Lockable and Safe
.
"
One Piece Solid Stainless Steel (1/2" nominal size)
Stud and 5/16" Threads  (Made in the USA) ( Patented)
No thread locker compound needed.
Ammo Can Waterproofing stays intact. (Thanks Bob Whitehead)
The padlock stud is a one piece design (post and thread together) (Patented) now with 30% less protrusion into the ammo can. Still made
right here in the good old
US of A
from Solid machined STAINLESS 303 STEEL
(Could of done it cheaper overseas but why??).
The stud is secured with a nylon insert locknut that is High Quality zinc plated steel thus eliminating the need for any thread locking compound. With this Nylon Locknut the bad guy can spin it all day long and the nut will not back off ( the bad guy will though). The watertight integrity of the can still stays intact because we now include a Bonded One Piece combo Metal and Rubber Washer that goes on the inside (instead of the old two piece version). T
he Large metal weather resistant outside washer is made in the USA also. Go USA .
The padlock stud will take up to a 1/4" lock shackle. Overkill, but once again why scrimp when security is your goal?  Installation involves drilling one 5/16" hole, insert the stud, put on the one piece bonded metal/rubber washer over the threads, then the locknut and you are Done.
Will work on all Ammo can lids.
Slotted lids ( slotted lids require two ), Big hole lids, and Small hole lids. For the small hole lids some minor fitting may be needed. Very Minor. The stud is now a few thousands under a 1/2" so any filing will be very minor as the lid hole is 1/2". If you have a slotted lid or a large hole lid then
NO
filing/fitting will be needed.
Kit includes:
The Stainless Steel stud, One large Steel washer, One small Bonded metal / rubber washer , One Grade 2 nylon locknut, and instructions.
(Please Note:
Kit contains Hardware only.
Ammo can and lock in the pictures are for Demonstration Purposes only. Thanks)
(*Lock and Ammo Can - Not included
.*)
INSTALLATION TIP:
On the 50 cal cans with the small hole latches , close the latch and use a 1/2” bit to lightly drill through the latch hole .
DO NOT DRILL THROUGH THE CAN
,
But just enough to scratch the surface. This will leave a mark which will be the exact center to start your 5/16” hole.
(Thanks Angelo Panarello )
Shipping within the 50 states included. (Shipping on
four or less
will be First Class Package,
five or more
will be USPS Priority box). Thanks
International shipping charges may vary.
Buy these and you will not regret it.
Remember - when you mean it , Green it.
(tm)
At Green Can we cherish our 2nd Amendment rights. With that Right comes the responsibility to act safely. The Green Can Locker was created to provide that safety
.
Protect your stuff and most importantly, those you love.
This product has a 100% guarantee. If for any reason it doesn’t meet your expectations, return it for a full refund.