Silver Solder Wire Hard 75% 1 Foot Soldering Jewelry Making & Repair 20ga

Description

SILVER WIRE SOLDER
HARD 75%
1 FEET LONG - 20ga WIRE
-
Cadmium FREE Solder
-
Silver Solder Wire
used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings and components.
Jewelers Silver solder comes in 4 grades…
the grades are the relative temperature flow points between one and the other.
The softer the solder the less content of silver with a lower melting temperature.
SALE is for Solder Wire is 1 Foot long...
(Approximately
- 1 Dwt / 1.55Gr)
.
SPECIFICATIONS:
JETS Product # 1925-452H
-
Solder WIRE:
Silver Content of 75%
-
Melt temperature:
1,365°F - 741°C
-
Flow temperature:
1,450°F - 788°C
-
Solder Wire Thickness:
20ga  -  0.032” -  0.81mm
-
Solder Wire Length:
12 Inches
Solder is
Cadmium & Indium FREE
Technical
Information:
-
Repairs:
Lower temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high temperature solder may cause a problem.
Assembly Work
:
In multiple component soldering use the Higher Temperature Solder first, then a medium grade and finally to a soft the lower melting point.
Production:
High temperature solder, the Hard grade should be used, with the higher silver content, better match of color and a stronger bond. Allowing future repairs to be performed with the softer solders.
Shipping: Via USPS MAIL
.
NOTE: Visit
JETSTOOLS
our ebay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper and Zinc, various gauges of Copper & Brass Wires and a selection of
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETSINC.
1E  1020 CKP Z M