Xbox 360 GPU Solder Preform

Description

Browse Shop
Feedback
Contact
Part No |
BEXBOX360GPU
Xbox 360 GPU Solder Preform
Ask Question
Save Seller
SHORT DESCRIPTION
This is a special preform to reball Microsoft X-Box" GPU
FULL US SUPPORT
We offer full US support on all the products we sell.. Please feel free Contact us by phone or email if you have any queries regarding our products
HOURS OF OPERATION
Monday through Friday from 08:30AM - 5:00PM (EST)
Product Features
Description
This is a special preform to reball Microsoft X-Box" GPU.
This will fix the Ring Of Death and the dreaded "two lights flashing
The solder balls are 63/37. Microsoft recommends that its IC and PCB be reflowed or reworked to a maximum of 3 three times. If after reflowing 3 times, the problem is not resloved then reballing is the only solution.
This preform make reballing easy using these simple steps.
1. Remove the GPU
2. Remove the old solder using solder wick
3. Apply a thin coat of Tacky Flux 8600 to the bottom of the GPU
4. Locate the preform and align with the GPU
5. Reflow the Preform
6. Place the GPU on the board and reflow it.
Visit Us
SRA Solder Dept
24 Walpole Park S
STE: 10
Walpole
MA 02081
Customer Support
Mon - Fri 8:30AM to 5:00PM (EST)
About us
SRA Solder is a division of SRA Shops formerly Stan Rubinstein Assoc., Inc. has been in business since 1962.
We are committed to providing each customer with the highest standard of customer service.
Why SRA Soldering Products?
Full US Support
Same Day Dispatch
Specialist Store
Quality Products
Ebay links
Our Store
Other Items
Feedback
Send message
Contact
Address: 24 Walpole Park S, STE 10, Walpole, MA 02081
Mon - Fri 8:30am to 5:00pm (EST)